Making my video using Adobe premier.
After creating my DVD cover and CD label, I needed to create my video. As I needed to have continuity through out the project I wanted to have the Video being a promotional video for my band.
One of the pictures I used on the DVD cover was a picture of the band playing an acoustic gig. As I wanted the video to reflect how the DVD cover is presented I though it would be best to use video recordings from the gig that is on the back of the DVD cover.
As I wanted to have it as a promotional video I needed to have a few songs in the video to show the versatility and different techniques that the band can offer. I decided to use three different songs which were very different. As the video had to be one minute long I felt that three videos was enough, any less then it wouldn’t show enough versatility in the band, any more and the user of the video wouldn’t be able to watch each different part of the video for long enough.
Half way through making my video I found it quite hard to cut up songs because if you cut up a song half way through a chorus or a verse then the song doesn’t sound very good because you can tell something is missing and it doesn’t show very good editing skills because the user will just think that the person who created the video has cut up each part of the videos in the wrong place and can make the video look bad which reflects bad on the product it is promoting.
I chose to have a slow song to start the video with which would engage the user in to the video by having soft sounds played. My next song played would be a more upbeat song, I felt that having a more upbeat song played in the middle would show the user that the band can play various styles of music. I also felt that if I got the mixing of the two songs going into each other would also show the user that the video had been edited in a good way fading one song in and another song out making it sound natural. If I had one song suddenly stop and then another song suddenly start it would sound weird and give the video a bad feel. Similarly, if I had the first song fade down to no sound and then the other sound fade up in sound once the first song had finished this would also create a bad feel for the video. Although it would be better than the first option, it would still at one point in the video leave the video with no sound which could cause the user to lose interest in the video as they are not being entertained.
To get over this mixing problem I chose to use the tool ‘Constant gain’ this tool is used to made in one audio track and fade out the other audio track at the same time. I started off the fading lasting around three seconds but I felt that it was too quick and didn’t have enough the first song to end and it felt like the second song just jumped in and started with no introduction so I decided to enlarge the constant gain placed in between two of the audio tracks so that the first track has enough time to fade out and the second song had enough time to fade in. Also the second song is quite loud and upbeat so stretching out the contestant gain tool means that the second song has more time to build up from being quite to full song and playing loud.
here you can see the constaint gain tool being used over both songs.
I used the same technique with the third track that was being played where I used the constant gain tool to fade in the third track and fade out the second track. I placed the constant gain tool in the same place as I did with the first time I used it but this time I placed it in between track two and three rather than the first time I did it where It was track one and two. The only thing doing it this way was as the first time I used it, the track was a slow song going into an upbeat song. This time it was an upbeat song going into a slog song and I didn’t think that the constant gain on the second tracks side was given enough time for a loud and upbeat song to fade out for. I decided to stretch the constant gain tool further over the second track side and smaller on the third track side, just so that the upbeat song had enough time to fade out without sounding strange and as the third track is quite a soft and slower song like the first track. This didn’t need much fading in because its not as loud as the second track. I had a play about with the levels and found out that having the constant gain tool longer on the second track and shorter on the third track was the correct way to go about mixing in the two songs as the video worked okay and sounded good.
As there was not a third track and the video has ended, I had nothing else for the third track to fade into. Here I felt it was best that I just made the third track fade down in sound until it was silent. I though I would do the same with the video fading down the videos colour until everything was black and had disappeared. To do this I placed two key frames along the timeline of the video track and the audio track. The first key frame was put in place to let the audio/video know that I want to change what is happening in some way. The second key frame is put in place so that it can tell the audio/video that the process that it had just been doing has now finished. Once I had these two key frames in place it was time to play about with them. The first key needed to stay in place because it is telling the audio/video until it gets to this key frame carry on what it had been doing. The second key frame was put in place so that I could change the levels of the audio/video and when it gets past this key frame to carry on for the rest of the video at this level.
here you can see the key frames i have put in place and then changing up and down the time line in the middle to make the audio and video fade out.
To carry out the changing of the audio and video I took hold of the second key frame and dragged it down as far as I could. This means that if the audio is playing, it will start to fade down in sound when it passes the first key frame and then be silent when it reaches the second key frame and the remain silent until the rest of the video or until I wanted the sound to be brought back up again. The same happens with the video but instead of the sound being taken down, this time it is the video and it is turned down in colour from the video being played at the first key frame and the video being blank when it reaches the second key frame. I decided to move about the video and the audio key frames making them longer and shorter to see which worked and which didn’t. I soon realised that to have the video and audio looking and sounding authentic the first key frame in the audio and video had to be in the same place and the second key frame in the audio and the video also had to be in the same place so the audio and video faded down at the same time.
The band has a logo which is the bands name with some fancy font with flowers growing out of it and then a large tree with lots of roots coming out of the bottom of it. I wanted to use this logo somewhere in the video but I didn’t know where to use it.
After completion of my video I had found out that it only lasted for 55 seconds but the specification of the video stated that it should last for 1 minute. I knew that I couldn’t stretch the video out any longer because they had been cut perfectly and anything on the end of the songs would be going into another verse or chorus and if I had a couple of seconds added onto the end of each cut then it would be a verse and a little bit extra and make the user of the video think that it had not been edited correctly as they have missed one bit at the end of each track.
I thought this was the perfect opportunity to place the logo as it was only 5 seconds long. Anything over 5 seconds could make the user lose interest and forget what they have just watched. Anything less than 5 seconds could be too quick for the user and they have missed it which isn’t giving the user what they wanted. I felt like having it in for 5 seconds would be the correct amount of time to be showing the logo for. The logo was black and the background was white and this didn’t work very well with the final video being faded out into a black screen so I decided to invert the colours of the logo so that the background would be black and the writing white as it would blend into the blank screen of the previous video. i also had it fading in from all black and then the white logo appearing.
here you can see that i have set my logo to fade in. the first key frame is set right at the bottom so it is blank and the second keyframe is at the top where the logo is full on screenl. i set them a few seconds appart so it looks like the logo is fadeing in more than just appearing.
When I had all the videos mixed and edited to how I wanted it. I felt that I needed to tell the user some information because at the moment it is just a few videos being played and mixed into each other with a simple logo at the end and as my market research of watching other bands promotional videos had show, I needed some text on screen to give the user of the video some information and what is being shown to them. Most of the band promotional videos I watched had information flowing through the video either vertically up or down the screen or horizontally going left or right through out the screen. I felt that if the information is going horizontally through the screen, no matter fast or slow the information if flowing, you can only see one letter at a time. This prompted me to make the text flow vertically through the video. I tried out the text going up and also down but I felt that the text going up from the bottom to the top was easier to read when it was at a slow pace.
I wanted to have the text black as most of the promotional videos I had seen used black text but when I tried this out it looked too dark and clashed with the video in the background. I then played about with a few other colours and came to the conclusion that white was the best colour to use as it stood out more. This also gave me the idea that at the end of the video when the video is fading to black. I could have some information stand out the best there. I also needed a good way of finishing off the video and instead of the last piece of information flowing off the screen at the top. I decided to have this stop slowly in the middle of the screen.
here yo can see that i have set all of th text to flow upward through the page as the video is playing.
Here you can see i am using the page peel transition tool. i wanted to use this tool because it looks like it is turning a page and i though it looked fancy. i also wanted something to be swiping from the top top the bottom because the text is scrolling from the bottom to the top so i wanted somthing to contrast that and i thought this was the best way of filling out what i wanted.
here you can it is the start of the video. i didn't want the video to just start all of a sudden, i wanted the audio to fade in along with the video. i chose to do the exact same thing as i did with fading the video out but this time it is the opposite way around. the video starts of blank and the audio is silent and then they both graduly gain at the same time.
as this picture shows. i have my text at the top and it slowly fades out into a blank screen but at the same time the logo slowly fades in. i wanted to over lap these as they were both white on a black background and thought if they faded into each other it would give the video a good look
Conclusion
In conclusion to making this video I found that having the audio and video fade in and out at the same time carries the video and makes it sound more authentic to the user who is watching the video.
Also having flowing text through out the video at a constant good speed can make the video look more of a promotional video and look better to the user.
If I was to make the video again I think I would have tried to include some more audio of someone talking and presenting the video whilst the original audio and visual tracks were playing.
I think I also would have speed up the speed at which the information flows through the video so that I could add more to information via text in the video.





