Thursday, 8 December 2011

Video

Making my video using Adobe premier.

After creating my DVD cover and CD label, I needed to create my video. As I needed to have continuity through out the project I wanted to have the Video being a promotional video for my band.

One of the pictures I used on the DVD cover was a picture of the band playing an acoustic gig. As I wanted the video to reflect how the DVD cover is presented I though it would be best to use video recordings from the gig that is on the back of the DVD cover.

As I wanted to have it as a promotional video I needed to have a few songs in the video to show the versatility and different techniques that the band can offer. I decided to use three different songs which were very different. As the video had to be one minute long I felt that three videos was enough, any less then it wouldn’t show enough versatility in the band, any more and the user of the video wouldn’t be able to watch each different part of the video for long enough.

Half way through making my video I found it quite hard to cut up songs because if you cut up a song half way through a chorus or a verse then the song doesn’t sound very good because you can tell something is missing and it doesn’t show very good editing skills because the user will just think that the person who created the video has cut up each part of the videos in the wrong place and can make the video look bad which reflects bad on the product it is promoting.

I chose to have a slow song to start the video with which would engage the user in to the video by having soft sounds played. My next song played would be a more upbeat song, I felt that having a more upbeat song played in the middle would show the user that the band can play various styles of music. I also felt that if I got the mixing of the two songs going into each other would also show the user that the video had been edited in a good way fading one song in and another song out making it sound natural. If I had one song suddenly stop and then another song suddenly start it would sound weird and give the video a bad feel. Similarly, if I had the first song fade down to no sound and then the other sound fade up in sound once the first song had finished this would also create a bad feel for the video. Although it would be better than the first option, it would still at one point in the video leave the video with no sound which could cause the user to lose interest in the video as they are not being entertained.

To get over this mixing problem I chose to use the tool ‘Constant gain’ this tool is used to made in one audio track and fade out the other audio track at the same time. I started off the fading lasting around three seconds but I felt that it was too quick and didn’t have enough the first song to end and it felt like the second song just jumped in and started with no introduction so I decided to enlarge the constant gain placed in between two of the audio tracks so that the first track has enough time to fade out and the second song had enough time to fade in. Also the second song is quite loud and upbeat so stretching out the contestant gain tool means that the second song has more time to build up from being quite to full song and playing loud.

here you can see the constaint gain tool being used over both songs.


I used the same technique with the third track that was being played where I used the constant gain tool to fade in the third track and fade out the second track. I placed the constant gain tool in the same place as I did with the first time I used it but this time I placed it in between track two and three rather than the first time I did it where It was track one and two. The only thing doing it this way was as the first time I used it, the track was a slow song going into an upbeat song. This time it was an upbeat song going into a slog song and I didn’t think that the constant gain on the second tracks side was given enough time for a loud and upbeat song to fade out for. I decided to stretch the constant gain tool further over the second track side and smaller on the third track side, just so that the upbeat song had enough time to fade out without sounding strange and as the third track is quite a soft and slower song like the first track. This didn’t need much fading in because its not as loud as the second track. I had a play about with the levels and found out that having the constant gain tool longer on the second track and shorter on the third track was the correct way to go about mixing in the two songs as the video worked okay and sounded good.

As there was not a third track and the video has ended, I had nothing else for the third track to fade into. Here I felt it was best that I just made the third track fade down in sound until it was silent. I though I would do the same with the video fading down the videos colour until everything was black and had disappeared. To do this I placed two key frames along the timeline of the video track and the audio track. The first key frame was put in place to let the audio/video know that I want to change what is happening in some way. The second key frame is put in place so that it can tell the audio/video that the process that it had just been doing has now finished. Once I had these two key frames in place it was time to play about with them. The first key needed to stay in place because it is telling the audio/video until it gets to this key frame carry on what it had been doing. The second key frame was put in place so that I could change the levels of the audio/video and when it gets past this key frame to carry on for the rest of the video at this level.


here you can see the key frames i have put in place and then changing up and down the time line in the middle to make the audio and video fade out.

To carry out the changing of the audio and video I took hold of the second key frame and dragged it down as far as I could. This means that if the audio is playing, it will start to fade down in sound when it passes the first key frame and then be silent when it reaches the second key frame and the remain silent until the rest of the video or until I wanted the sound to be brought back up again. The same happens with the video but instead of the sound being taken down, this time it is the video and it is turned down in colour from the video being played at the first key frame and the video being blank when it reaches the second key frame. I decided to move about the video and the audio key frames making them longer and shorter to see which worked and which didn’t. I soon realised that to have the video and audio looking and sounding authentic the first key frame in the audio and video had to be in the same place and the second key frame in the audio and the video also had to be in the same place so the audio and video faded down at the same time.





The band has a logo which is the bands name with some fancy font with flowers growing out of it and then a large tree with lots of roots coming out of the bottom of it. I wanted to use this logo somewhere in the video but I didn’t know where to use it.
After completion of my video I had found out that it only lasted for 55 seconds but the specification of the video stated that it should last for 1 minute. I knew that I couldn’t stretch the video out any longer because they had been cut perfectly and anything on the end of the songs would be going into another verse or chorus and if I had a couple of seconds added onto the end of each cut then it would be a verse and a little bit extra and make the user of the video think that it had not been edited correctly as they have missed one bit at the end of each track.

I thought this was the perfect opportunity to place the logo as it was only 5 seconds long. Anything over 5 seconds could make the user lose interest and forget what they have just watched. Anything less than 5 seconds could be too quick for the user and they have missed it which isn’t giving the user what they wanted. I felt like having it in for 5 seconds would be the correct amount of time to be showing the logo for. The logo was black and the background was white and this didn’t work very well with the final video being faded out into a black screen so I decided to invert the colours of the logo so that the background would be black and the writing white as it would blend into the blank screen of the previous video. i also had it fading in from all black and then the white logo appearing.


here you can see that i have set my logo to fade in. the first key frame is set right at the bottom so it is blank and the second keyframe is at the top where the logo is full on screenl. i set them a few seconds appart so it looks like the logo is fadeing in more than just appearing.

When I had all the videos mixed and edited to how I wanted it. I felt that I needed to tell the user some information because at the moment it is just a few videos being played and mixed into each other with a simple logo at the end and as my market research of watching other bands promotional videos had show, I needed some text on screen to give the user of the video some information and what is being shown to them. Most of the band promotional videos I watched had information flowing through the video either vertically up or down the screen or horizontally going left or right through out the screen. I felt that if the information is going horizontally through the screen, no matter fast or slow the information if flowing, you can only see one letter at a time. This prompted me to make the text flow vertically through the video. I tried out the text going up and also down but I felt that the text going up from the bottom to the top was easier to read when it was at a slow pace.

I wanted to have the text black as most of the promotional videos I had seen used black text but when I tried this out it looked too dark and clashed with the video in the background. I then played about with a few other colours and came to the conclusion that white was the best colour to use as it stood out more. This also gave me the idea that at the end of the video when the video is fading to black. I could have some information stand out the best there. I also needed a good way of finishing off the video and instead of the last piece of information flowing off the screen at the top. I decided to have this stop slowly in the middle of the screen.


here yo can see that i have set all of th text to flow upward through the page as the video is playing.

Here you can see i am using the page peel transition tool. i wanted to use this tool because it looks like it is turning a page and i though it looked fancy. i also wanted something to be swiping from the top top the bottom because the text is scrolling from the bottom to the top so i wanted somthing to contrast that and i thought this was the best way of filling out what i wanted.


here you can it is the start of the video. i didn't want the video to just start all of a sudden, i wanted the audio to fade in along with the video. i chose to do the exact same thing as i did with fading the video out but this time it is the opposite way around. the video starts of blank and the audio is silent and then they both graduly gain at the same time.


as this picture shows. i have my text at the top and it slowly fades out into a blank screen but at the same time the logo slowly fades in. i wanted to over lap these as they were both white on a black background and thought if they faded into each other it would give the video a good look

 


Conclusion

In conclusion to making this video I found that having the audio and video fade in and out at the same time carries the video and makes it sound more authentic to the user who is watching the video.
Also having flowing text through out the video at a constant good speed can make the video look more of a promotional video and look better to the user.

If I was to make the video again I think I would have tried to include some more audio of someone talking and presenting the video whilst the original audio and visual tracks were playing.
I think I also would have speed up the speed at which the information flows through the video so that I could add more to information via text in the video.




Friday, 4 November 2011

Making the CD Label

When making my cd label, I already had my DVD cover finished so I knew I had to follow the guide lines from what I had done on the DVD cover.
I wanted to keep the house style up of using red and yellow, the colours used in the guitar that is featured as the bands logo and the colour of the text in the DVD cover.
To make the CD the right size I needed to find out the measurments, when I had got these measurments I created some guides on my page which would give me a series of squares. The middle square is the exact height and width of my inner CD circle. I simple created a circle shape inside the square and dragged it out to the edges. I had the snap to guides function on so the circle would be the correct size. I did the exact same for te outer circle. This gave me my basic CD shape.

The first thing I wanted to do was to type in the bands name which is Stonepit Drive as this along with the DVD title is essential. I types in Stonepit drive in block capitals so the user of the DVD can clearly see who the DVD is about. I then wrote Break the chains at the top of the CD also in block capitals going along the top of the CD in a straight line. I didn’t think this looked right so I decided to put each word under each other center allinged and it looked a lot better. I wanted both the band name and the DVD name to be the same colours as they were on the DVD front cover. Unfortunatly on the front cover they are both yellow and I wanted a bit of diversity so I devided to change the band name to red so it has both colour ranges going on.


After the Band name and the DVD title, I wanted to put the logo on the DVD. I wasn’t sure wheather to have just the large S on the DVD or the Guitr with the S. I played around a lot with different designs having  the big S on the left hand side of the DVD and having the guitar on the right hand side of the screen. I didn’t like this because they looked like two separate things the S was okay but the guitar looked out of place. I then tried having the large S on both sides of the DVD but it looked a little bland. Finaly I put the guitar with the large S wrapped around the neck of the guitaron both sides on the DVD label. This seemed to be the best of all of the options I had so I stuck with it and I think it looks good.



My final thing to do on this CD lable was to put small print text around the outside of the innner circle.
To do this I created a circle shape and placed it exacitly over the innner circle and coloured it white so you wouldn’t see it when it was printed onto the DVD. I then took the text tool and hovered the mouse curser over the outside of the circle. When I did this the curcer changed to a slightly ittalic looking curcer text tool button and allowed me to click on the ourside of the circle. Whe I did this it allowed me to type and when I typed things in, it would wrap around the outside of the inncer circle. Although I had a colour code of yellow and red. I thought the best colour to do this would be white as it is extra information and on most DVD and CD covers, the text going around the outside if oftern white so I thought I would put it white to give it more or a profesional look.


Friday, 21 October 2011

Week 3

In my thrid week i created the spine and the back cover.

To work out where my spine and back cover would go i used guide lines to place over my dvd, this would give me space to work and tell me where to and where not to place things.

On the spine i had the letter S logo which was used in the front cover weaving in and out of the guitar neck. i simply duplicated this layer and placed it at the top of the spine, it worked well.

I then used the text tool to write out the band name of Stonepit drive, i wrote this out going along the screen but then rotated it 90 degrees so that it was going down the spine, i used the same text font and colour scheme to keep up a house style.

At the bottom of the Spine i put BTC which is the DVD title cover but shortend down to its ennitials. this was created with the text tool and used the same text font and colour scheme.

I then started on the back cover, i wanted a large picture of the band on the back to show the customer the band. i just chose a picture of the band which had similar colours that i thought would go well with the cover.

after this i created the stars and the reviews at the bottom of the page, i created the stars and typed up the reviews in the text tool. i used alternating colours of red and yellow so that they would bounce off each other.

My final process of week 3 was the information part. this eas created with the text tool over a blank white box so that the user can see quickly all the information they need.

Friday, 7 October 2011

Tools i used

Smudging tool

I thought of how I should try and tackle the cracked and worn out title of the band, some ideas I had were to have the title and then cut out little bits from the title with the cut tool. When I did this the title looked a bit like someone had cut away parts of the title instead of the title had faded away naturally. If you look at the images above of band titles, they don’t have any sharp edges of acute angles cut out of the letters, they are very random and smooth which makes it look a lot more natural fade and ware.
Another idea I had was to use the blur tool which would blur the edges of the title into the background, or where the S overlays the guitar it would blur and blend these two together. I think that this would look good as it has a faded effect but it doesn’t have an old and battered effect that the usual band logos have.
In the end I used the smudge tool, I liked this tool because it has soft lines and you can curve the edges as you don’t have to smudge in a straight line. When I was smudging I always used the tool going inwards into the letter because when the smudge came out of the letter it had a spikeier and danger look than an old cracked and battered logo.


As you can see the image above is the final S that I used. You can see the smudge tool on the outside and inside of the letter going into a point. One of the advantages of the smudge tool is that it does not have stiff or sharp edges so it, when the smudge morphs into the point it is very faded and smooth which gives it a more natural effect.
I also wanted the S to look like it was wrapped around the guitar neck. How I managed to do this was take a small part of the guitar neck where the middle part of the S crossed over the guitar and then place the small part of the guitar neck on top of the cross over S to make it look like it is wrapping around.
I created each different element of the images with different layers. This means that when I used the smudge tool on the S it only smudged the letter and didn’t smudge the Guitar neck as this wouldn’t give off the effect that I wanted to give. It also means that I can smudge the S and the guitar comes in behind the smudged area to give it more of a old and hacked look.

Eye dropper tool
The guitar I used is a signature guitar used by the lead guitarist in the band. I wanted to incorporate the colours used in the guitar into the text of the front cover, the colour I was going to use would be the orange as this is the bulk colour of the guitar I wanted to do all of the text the same colour as the guitar but the word ‘stonepit drive’ was too close to the guitar and the colours clashed so it looked a bit odd. I decided to change the colour of the stonepit drive text to red as this is the second colour used in the outside of the guitar, it didn’t work being the same colour as they were too close to each other so I decided to keep the text red but change it to a different shade of red so the colour scheme still matched. I then used the top text which it the title of the DVD to be the same colour as the orange guitar. I did this by using the eye dropper tool, taking a sample of the guitar colour and then using the bucket tool to fill in the text. I liked the way that the two colours worked together and being the colours from the guitar. I wanted the text to stand out a little more so I changed the background from white to black. As the two colours I am using for the text are quite bright colours, using them against the black background made the text stand out more without changing anything to the text itself.

Making my Front cover for DVD

I decided on a topic for my DVD cover and case, I am going to use my band as the topic and make it a DVD cover and CD front. My band is called stonepit drive so I want something to represent the fact that we are a rock band. The best way I thought to fulfill this was to use a guitar which the lead guitarist uses. I also wanted some way of the title being around the guitar neck sort of representing a snake like patten of curling around the neck.

Layer  1:

I found an image of the guitar and put that into Photoshop, the image had lots of different thing is the background that I didn’t want as I only wanted to use the guitar, I used the magic wand tool to cut out the background of the image leaving only the guitar in the middle, the magic wand worked well as it cut out the guitar very fine even around the circular edges which I was very pleased with.

Layer 2:

My next layer was to make the title wrap around the guitar neck, I tried different ways of doing this but it wouldn’t work as the title was too small and the guitar next was covering some letters, I could have made the title bigger which would have let the text wrap around the guitar neck without covering up and hiding some letters but this would have made the title of the band too large and taken up too much space, I then decided to take the first letter of the band which is ‘S’ and wrap this around the neck of the guitar, this worked out very well as the S is already in a curling shape. I placed the letter on top of the guitar and then needed some way of it to be wrapping around the neck, this would need another layer.

Layer 3:

My third layer was made to be used in conjunction with my first layer. I wanted the S to wrap around the guitar neck, I thought of different ways of doing this, one of which was to cut the S into two different parts, one top part and one bottom part, I would then place these either side of the guitar neck to make it look like the guitar neck is hiding part of the letter behind itself. I found out very early on that this was hard to do as it needed to be lined up exactly, if one of the parts of the S was slightly out of line then the S wouldn’t look authentic. I then thought of another way of doing this, I cut out a small part of the guitar neck (the part where it would be covering the S) I then placed this over the letter to make it look like this new guitar neck was part of the original, I lined the neck up exactly onto the original guitar and it looked authentic as you couldn’t see any lines of overlay or slightly out to the side.

Layer 4:

My forth layer was the title of the band, as I could not wrap the title around the guitar I decided to place it next to the guitar, as I already had an S in place, I thought it would look good if I used this letter to be the first letter of the title, I then put in a text box and wrote ‘tonepit drive’. I didn’t think this worked much as it looked like the S was a logo and the name of the band was ‘tonepit drive’. I then changed the title so it said stonepit drive keeping the S around the guitar; although this was not the look I originally wanted I liked the end result.
Layer 5:

My fifth layer was the title of the DVD I had already done the title of the band but wanted the DVD to be a different title. I thought about different titles I could use for the DVD, I wanted it to be included in the Rock theme I had going, I then came up with a title called breaking the chains which I thought was a good title for a rock band as you can sometimes associate chains with rock bands. I then put the title of the rock band at the top of the cover as I wanted the customer to see this first. I wanted to use consistency throughout the DVD cover so I used the same font style as the previous text I had used.

Layer 6 & 7

Layers six and seven were the same layers just flipped around. As the title of the DVD was called ‘Breaking the chains’ I wanted to have some sort of imagery of chains in the picture to relate to the title. As the title had the word ‘breaking’ in it, this made me realize that the chains could not be a simple chain along the bottom the DVD case they had to be broken. Having this in mind I created a chain line image swooping down from one side of the screen to the center bottom of the screen with the final chain at the end snapped in half. I then copied this and flipped it over to the other side of the page creating the look that there once was a chain going through the middle but somehow it had become broken and the chains were falling down.

Layers 8, 9, 10, 11 & 12

 These are the final layers I used in the DVD cover, I already had the image of a broken chain on my front cover but I wanted some debris to make it look like the chain had been smashed up. I took a few of the loops that I created the chain with and cut them in half, I then cut out sharp lines to make the chain loops look cracked, I could have used a fancy tool for this but as I wanted the chain to have sharp and fine edges, I used the cut tool as I could cut out parts of the chain to give it a more broken effect. I placed these in between the two chain reels that have been broken to make the have the authentic debris look. I had two different images at the bottom, one of which was half a chain and the other was one and a half chains. I wanted them to be different because If It was real then all of the debris on the floor would have been different.

Layer 13

the thirteenth layer on this page is the parental guidance logo, it is warning the customers that one or more songs on this DVD may be explicit.
I used took the logo from a website i found, i did not edit it in any way as they are always the same just a simple rectangle. the logo is usually at the bottom on the page on either left or right hand side, i had some room on the left hand side so i deiced to place it there.

Layer 14

My fourteenth layer on this front cover is the text saying 'Plus bonus live DVD' i have used the text Calibri for this as this is the text i have used through out the front cover. keeping with the colour code of yellow and red i have decided to change this text to yellow as i already have some red text around it and wanted it to stand out.

Parental Guide Evidence: June 8th 2001 INK ROCK [Online] available at: http://stephenlduncan.blogspot.com/2011/06/parental-guidance-suggested.html [Accessedoctober 21st 2011]

Guitar image evidence: September 18th 2007 Electric guitar planet. [Online] Available at: http://www.electricguitarplanet.com/2007/09/18/epiphone-les-paul-100-electric-guitar [Accessed October 7th 2011]


SPINE

i have three layers on my spine, i needed to think what was the most important things to put on the spine as i dont have alot of room on there, they also need to be important as if it is amoungst other DVD's on a shelf then the only way of making the customer choose this DVD is giving the best information as possible for it.

Layer 1

My first layer is the big 'S' used on the front cover. the S is on its own as i wanted it to be seen as a seperate logo away form the guitar. i have used the colour red for this as it uses red on the origional logo and i wanted it to carry out the consistancy.

Layer 2

My second layer is the downward text saying Stonepit drive, i have used the same font for this but decided to change the text to yellow as it is surrounded by red text.

Layer 3

My thrid and final layer for the spine is the text that says BTC, this stands for the DVD title, break the chains, i have decided to put this text in red so on the spine i have a downward changing of colours going Layer 1, 2 and 3 which is Red yellow and red again. i first had the text going out to the guidelines but then realised when the cover is printed out and folded over on the corners, if the text is out to the sides then the text is going to fold with the corners, to over come this i simply made the text smaller.

BACK COVER

Layer 1

my first layer on the back cover is the large band picture used. it takes up about half of the back cover, i want the picture to be big as it intreegs the customer. also this is what the DVD is about so i wanted it to stand out. i had many different pictures of the band to choose from but i decided to use this picture because there are a few red and yellow colours in the picture which go with the colour scheeme i have.

Layers 2, 3 and 4

These three layers are the stars that are on the back, on most dvd covers on the back you will see some well known music companies have put a quick review on the back using stars to rate how they found the DVD, i have decided to do this aswell. i wanted to keep with the colour code so i put the colours in red.

Layers 5, 6 and 7

These three layers i have used are the companies names and a few word summary of the dvd which go with each of the stars. they say the name of the company they are from a a quick few word description of how they found the DVD. i have used the same text font size and this time decided to go for yellow font as it bounces off the red stars.

Layer 8

My eighth layer is a Barcode. on all products they will have a barcode so i knew my DVD had to have one too. i didn't take one from the internet as they are all individual so i created this one myself drawing thin and thick lines going down to make it look like a barcode.

Layer 9

My ninth layer on this DVD back cover is the information part of the cover, it talks about what language the DVD is in, how long in minutes each DVD is and and what the record lable is. i had an even amound of red and yellow text used on this back cover so i thought i would experiment with what colours would go best, i first used the red text, i thought this went well as it stood out from the white background. although i thought this worked, i wanted to see what the yellow text would look like, i turned the text to yellow but it wasn't very good because Yellow and White are both bright colours and clashed with each other, i then changed it back to red.

Week 2

This week we have been using Adobe Photoshop to manipulate images.

we had a series of images which we were given an alloted time to manipulate the images using various tools so that we could understand how the tools work and different scenario's where the tools could be used.
for example, some of the tools we used were basic pick up tools. this included a rectangular box and circurlar tool were we could cut out these shape, some of the tools had add on functions like the free range tool, this means that if we cut out a rectangle and then clicked on the free range tool we could change the length, width and height all at the same time, we could also change the possition of the rectangle and also more it in a clockwise and anti clockwise fashion if we wanted to for better effects, a tool also used for both rectangle and circular function is useing the 'shift' key'. When using this key, it can help out alot because it keeps the height width and length of the selected item relevent to its self. this means if you click on a rectangular shape that is 12px high and 6 px wide, you can change the shape in preportion to itself, this means if you downsize the shape it can be 8x4 6x3 or if you want to enlarge the image it can be 24x12 or 48x24 and many other sizes.

I also had a play around with the magic wand which let me cut out backgrounds and different parts of the images i was using. i really like this tool as it can save a lot of time from trying to cut out the image by hand as this can take a very long time and you can sometimes go over the edges and cut out more than you want so you end up cutting away bits that you dont want.
it also has its bad parts as sometimes the wand can cut out parts that you dont want so you will have to change the colour code down to how close to each colour you want the image you are cutting out to be

Friday, 23 September 2011

Week 1 - File Formats

Week 1

My task was to download a series of images from the VLE
i then had to find out what file format each image was and
write down an application on the computer i was using that
would open the image and display it correctly.
The files i had to find were the following:
BMP, TIF, JPG, TGA, GIF, PNG, SVR and EXR
I found some of these easy to find as i have worked with
the file types before in different things i have created.
For example i have used PNG before as i have made many
images using the simple application of paint.
I have also used JPEG files as i have previously created
a webpage before and needed to save it as a JPEG to get the
best use of the photo for uploading onto the webpage.

File formats i have not used before would be the SVG file.
This became dificult as i had never heard of it let alone trying
to find what application would run.
I decided to search online for the some information about the
file SVG, i found some information explaning that an SVG
can be created and edited in simple text application as it is
a vector image.

I have also created animations using Macromedia Flash player
and have had many interactions with GIF files before as i needed
to upload these animations to the internet as well as still images.

In conclusion, i found most of these file formats fairly easily
as i had come across them before but some too a little bit of
searching the internet to find more information.

Will Newell